What if you could make $ 100,000 a year welding from home?
What if you could earn even an extra $ 500 a month from home, using your current skills? If you are a welder with basic welding skills and you are between jobs or you are not being paid at your current job, this article might be worth reading; Let’s think outside the box for a minute about how you can make money welding from home.
From Home Welding # 1:
Teaching or tutoring any skill is a very profitable business. In any city of any size, you will see at least one tutoring business in a brick and mortar mall location. In that same town there will be at least a dozen other tutors working from home, earning a lot of money.
Yes, most of the time they are tutoring students in math and reading. Relax and think about the skills you have that can also be used in a tutoring business that you can set up and get cash, like milk from a cow.
Let’s say you’re good enough with TIG welding razor blades or can butts.
If you can teach a non-welder to operate a good enough TIG torch to go ahead and practice on your own at home in about 3 hours of your hands on yours, you will pay up to $ 100 an hour for 3 hours of TIG instruction. . Just 2 students a day would earn you $ 100,000 a year. If you think I’m kidding, I’m NOT! There are many reasons why education is so valuable, and that includes intense and focused tutoring in welding.
6G pipe welding is the highest paying of all welding certifications (most 6G welders earn between $ 100,000 and $ 300,000 a year) and the demand is insane. However, if you are a 6G welder and want to stay home, you can set up and teach 6G in your garage. Let’s say you do this with 7 students, each one pays you $ 10,000 for a 3-month course. Yes, they will pay for it, especially if you show them how they will have more time with your hand on theirs (the # 1 secret to learning 6G fast).
From Home Welding # 2:
I was in Palm Springs the other day. I’ve been in and around stores for 30 years … and when you see a dealer’s truck and it’s a recent model with no dents or lots of scratches, clean, organized, and well-equipped, it means (99% of the time) that guy is making money.
I stopped at a stoplight behind one of those trucks: “Joe’s BBQ Service and Repair.” That’s it, that’s all Joe does. Will weld cast aluminum or steel. He will clean and polish. It will replace a burner or control. Either you will buy your old unit and sell you / or sell you a new one.
Yes, you need a city with a lot of high-end barbecues. Other than that, go find it.
From Home Welding # 3:
Large steel trimmings. In art of all kinds, size matters. For example, 20 years ago we purchased two 4 ‘long coat racks – each is a 1.5 “x 1.5” x 1/8 “piece at a 4’ long angle with 6 angle-welded horseshoes to hang the coats.
A scene composed of 7 horse cutouts and 7 trees is welded onto the horizontal surface of the angle. We paid $ 185 for each of these 20 years ago … that would be about $ 300 a piece in today’s dollars.
The problem with making them is that the 14 cutouts in each unit are too small to cut by hand; you need a computerized plasma table to make them.
This is where the magic of size makes all the difference.
The artist who drew the cutouts on our coat rack was good. Each of the 7 horses is different and beautiful, just like the trees. Any – or all of these – cutouts can be chalked on a steel sheet of, say, 4 ‘x 8’ x 3/16 “. Now all you need is a plasma or oxy torch to create the large version. .
What would a horse cut from a 4 ‘x 8’ sheet sell for?
$ 300 to $ 700. It will depend on where you are and how you market it. Marketing is a big part of any business. Good marketing is not difficult, you can do it.
As you can see, if you could get a “commercial pipeline” full of inventory and sales and you were delivering 2 horses a day, you could easily make $ 100k. The other big opportunity with big cuts is doors. The key to all of this in the art category is the beautiful line drawings. If you are not an artist, hire one on the condition that they sign the copyright for you.
There are endless ideas for using even the most basic skills in your home to make a great living or just to earn extra money. The trick is:
Step A:
Find what works best for you.
Step B:
Write a simple plan of attack. Don’t put the cart before the horse. Many small businesses fail because the owner gets caught up in the details and misses the point of what is important. Here’s what’s important: Don’t spend money – MAKE MONEY!
Step C:
The first business rule is TO BE NOTIFIED. That is also the end goal of all marketing – once you have enough eyes on yourself, you will be successful. The common mistake is leaving marketing for last while concentrating on every little rule and piece of paper. A business license won’t do you any good if you don’t make money! Save your money and get it (if you really need it) when you make some money. Towns and cities will simply say, “do you have a business license?” When they ask, say, “I’m going to get one now.”
Conclusion:
You are lucky to live in a country where you can go from nothing to something in a hurry. However, to get anywhere in a hurry you need to run a lot. You will never regret.
What should you do next?